www.internationalmarineservice.com

C10 Update Cable

New Version - Now has Standard Device NET Connectors
The 2' Extension Cable is the mainline of the Suzuki Modular Instrument System. Data communication runs the length of the boat, capped at each end with a 120 ohm Terminating Resistor. NMEA 2000 compatible sensors or other devices can be added by the use of T-connectors throughout the system.

The Simrad IS35 / Suzuki Gauge Sun cover

This cover protects the new Suzuki Color Display (C-10) from he elements. Use the cover to extend the life of your Suzuki C010 color gauges.

Benefits:

New Version - Now has Standard Device NET Connectors
The 6' Extension Cable is the mainline of the Suzuki Modular Instrument System. Data communication runs the length of the boat, capped at each end with a 120 ohm Terminating Resistor. NMEA 2000 compatible sensors or other devices can be added by the use of T-connectors throughout the system.

Suzuki NMEA Adaptor Harness. Allows connection to other NMEA devices (Device NET).

Fused (3A) lead connects extension cable to the power source. Includes (1) T-Connector

New Version - Now has Standard Device NET Connectors
The 15' Extension Cable is the mainline of the Suzuki Modular Instrument System. Data communication runs the length of the boat, capped at each end with a 120 ohm Terminating Resistor. NMEA 2000 compatible sensors or other devices can be added by the use of T-connectors throughout the system.

Adaptor must be used with Engine Interface to connect the DF150G/175G/200AP/250AP/300AP outboard to the system.

Suzuki NMEA Adaptor Harness. Allows connection to other NMEA devices (Device NET). Female to Female

Adaptor must be used with Engine Interface to connect the DF150G/175G/200AP/250AP/300AP outboard to the system.

SMIS Adapter to connect at engine SDS connector

New Version - Now has Standard Device NET Connectors
The 25' Extension Cable is the mainline of the Suzuki Modular Instrument System. Data communication runs the length of the boat, capped at each end with a 120 ohm Terminating Resistor. NMEA 2000 compatible sensors or other devices can be added by the use of T-connectors throughout the system.

Adaptor must be used with Engine Interface to connect the DF150G/175G/200AP/250AP/300AP outboard to the system.

Suzuki Power Node. Allows NMEA network to be powered from multiple power sources (key switch, accessory switch, etc). Includes (1) T-Connector.

SIMS Reverse K8 Adapter

Suzuki Temperature Sensor. Surface Water Temperature sensor. 10ft cable. Includes (1) T-Connector.

The most important part of the SMIS data system. DF 9.9B thru DF 300 Suzuki Outboards can connect to the system using the exclusive SMIS Engine Interface. (Adapter Cable also needed for DF150G/175G/250AP/300AP applications.)

The most important part of the SMIS data system. DF 9.9B thru DF 300 Suzuki Outboards can connect to the system using the exclusive SMIS Engine Interface. (Adapter Cable also needed for DF150G/175G/250AP/300AP applications.)

Monitors fluid levels such as fuel, live well water level, etc. 10ft cable. Includes (1) T-Connector

Suzuki Speed Sensor. Paddle wheel-type speed sensor. 10ft cable. Includes (1) T-Connector.

Pressure Sensor

New Version - Now has Standard Device NET Connectors
The Suzuki 4 inch Multi-Function Gauge uses a state-of-the-art high-contrast, dot matrix display to monitor real-time graphic and numerical digital data. When connected into the SMIS system, it can monitor all engine functions, act as a Speedometer, Tachometer, GPS and many others. Shown with optional chrome bezel.

New Version - Now has Standard Device NET Connectors
The Suzuki 2 inch Multi-Function Gauge is capable of all functions of the 4" gauge except Engine Monitoring Functions. When connected to the SMIS system, it can be programmed to monitor all other functions. Shown with optional chrome bezel. Includes (1) T-Connector.

GPS receiver module interface for display of accurate location and speed on Multi-Function Gauges. Includes (1) T-Connector.
Features Include:

Suzuki 4 inch Multi-Function Gauge Starter Kit for 2008 and Newer Models
New Version - Now has Standard Device NET Connectors
The Suzuki 4 inch Multi-Function Gauge uses a state-of-the-art high-contrast, dot matrix display to monitor real-time graphic and numerical digital data. When connected into the SMIS system, it can monitor all engine functions, act as a Speedometer, Tachometer, GPS and many others. Shown with optional chrome bezel.

Kit Includes:

The C10 works with current, EFI-equipped Suzuki models manufactured from 2013 and newer with engine serial numbers beginning with S/N 310001 & Newer

The new Suzuki Color Display (SCD) is a high resolution LED that is extremely easy to read. It features front mounting points, and it can be installed in the NMEA 2000 network with one easy connection. It's capable of monitoring two engines simultaneously, including: RPM, speed*, water pressure*, fuel level and fuel consumption*, engine temperature, trim, engine hours, and engine voltage.

Benefits:

The Suzuki 2 inch Multi-Function Gauge Starter Kit for 2008 and Newer Models. Capable of all functions of the 4" gauge except Engine Monitoring Functions. When connected to the SMIS system, it can be programmed to monitor all other functions. Shown with optional chrome bezel.

Kit Includes:

The new Suzuki Color Display (SCD) is a high resolution LED that is extremely easy to read. It features front mounting points, and it can be installed in the NMEA 2000 network with one easy connection. It's capable of monitoring two engines simultaneously, including: RPM, speed*, water pressure*, fuel level and fuel consumption*, engine temperature, trim, engine hours, and engine voltage.
Benefits:

*Requires installation of additional sensors.
**Data displayed depends on the sensors installed in the NMEA 2000 network.